News Center

News & Blog

Low Voltage Generator for Industrial and Standby Power

26-11-16

The low voltage generator from Engga is the N Series, an alternator range from 6 to 3,750 kVA. The product page lists a patented SWS stator, a RIS rotor insulation, class H insulation, brushless excitation and a standard SAE interface for coupling to mainstream engines. The range is used for industry, marine, telecommunications, oil mining, construction and other continuous or standby power applications.

Electrical Performance

The power factor is 0.8 lagging. The steady-state voltage regulation is 1 percent or less with an analog AVR and 0.25 percent or less with a digital AVR. The transient voltage regulation is -15 percent to +20 percent of Un, tested to GB/T1029, and the voltage regulation range is more than plus or minus 10 percent Un. The whole series is listed with parallel operation capability.

The S1 and S10 operating modes are listed as high-efficiency modes. The buyer should confirm which mode the project needs: S1 is a continuous duty, while S10 is a periodic duty with a defined load cycle. A genset that is sized on an S10 rating may not deliver the same continuous output as an S1 unit, so the rating should be stated on the data sheet.

The AVR is the part that holds the voltage when the load changes. An analog AVR is simple and robust, while a digital AVR can be programmed and can communicate with a controller. The page lists both options, so the buyer should choose the one that matches the switchgear and the monitoring system. A digital AVR also needs the correct settings for the parallel operation and the protection curve.

Construction

The stator uses a distributed winding with coil ends made with the Engga SWS technology. The rotor is an integral salient-pole design with a monolithic damping structure and the RIS winding insulation. The page lists a single-point or dual-point design and an IMB35 mounting method. The SAE interface lets the alternator be matched to a diesel engine without a special adapter.

The buyer should send the engine model, the flywheel housing and the coupling drawing so the SAE interface can be checked. A mismatch in the SAE size or the coupling height is a common cause of a delayed commissioning. The page does not list the alternator weight for each frame, so the lifting plan should be based on the actual unit.

Environment and Protection

The standard operating range is -15 to +40 degrees Celsius, below 1,000 m above sea level and an average relative humidity below 90 percent. The standard protection rating is IP21, and the page lists a maximum IP54 rating as an option. For an outdoor or a dusty site, the higher IP rating and a derating check should be included in the design.

Beyond the standard conditions, the page refers to GB/T755 for a capacity reduction. A generator that runs at a high altitude or a high ambient temperature loses cooling capacity, so the output should be derated rather than assumed. The buyer should send the site altitude, the ambient and the enclosure type for the rating check.

Testing and Commissioning

Before shipment, the alternator should be tested for winding resistance, insulation resistance, no-load voltage and short-circuit characteristics. The buyer should ask for the routine test report for the serial number and should check the excitation and the AVR settings. A factory test does not replace the site commissioning, but it catches a manufacturing fault before the unit is shipped.

At site, the generator should be aligned to the engine, the coupling should be checked and the phase sequence should be confirmed before the breaker is closed. The first run should be at no load, then at a step load, with the voltage and the frequency recorded. A genset that is paralleled to the grid or to another set needs a sync check and a load-sharing test.

Applications

The page lists marine applications, intelligent manufacturing, data centers, telecommunication hubs, plateau and polar regions, oil and gas drilling, nuclear power supply and power plants. Each application has a different requirement: a data center needs a high reliability and a fast transient response, a marine unit needs a class approval, and a plateau site needs a derating. The buyer should state the application and the class rules at the inquiry.

Ordering and Contact

To order a low voltage generator, send the kVA, the voltage, the frequency, the speed, the power factor, the engine model, the SAE coupling, the IP rating, the ambient and altitude, the application and the destination. If the project needs a class certificate or a type test, include that in the inquiry. Engga can be reached through the contact form on the product page. The company is based in Yangjiang, Guangdong Province, China.

Send the engine data and the site conditions with the inquiry, and the team will confirm the alternator, the coupling and the protection rating before a quotation is issued.

Related


Understanding the Advantages of Digital Excitation Controllers in Consumer Electronics

Understanding the Advantages of Digital Excitation Controllers in Consumer Electronics Table of Contents 1. Introduction to Digital Excitation Controllers 2. What Are Digital Excitation Controllers? 3. The Benefits of Digital Excitation Controllers 3.1 Enhanced Performance 3.2 Energy Efficiency 3.3 Improved Reliability 3.4 Cost-Effectiveness 4. Applica


Maximizing Efficiency and Performance with Compact Marine Generators

Compact marine generators are essential equipment for boats and yachts, providing reliable power sources for various electrical needs while ensuring efficiency and ease of use in marine environments. Designed to occupy minimal space, these generators are perfect for small to medium-sized vessels, where every inch of space counts. Whether you are powering navigation systems, lighting, or onboard ap


Marine Power Generators Explained: Unleashing the Benefits for Your Vessel

Marine Power Generators Explained: Benefits for Your Vessel Table of Contents Understanding Marine Power Generators The Importance of Power in Marine Environments Different Types of Marine Power Generators Benefits of Marine Power Generators for Your Vessel Installation Considerations for Marine Power Generators Maintenance and Care for Marine Power Generators Choosing the Right Gen


Understanding Medium Voltage Alternators: A Key Component in Automotive Electrical Systems

Medium voltage alternators are crucial components in the automotive electrical landscape, particularly in electric and hybrid vehicles where reliability and efficiency are paramount. These alternators typically operate within a voltage range of 1kV to 35kV, providing a stable power supply for various electronic systems in modern vehicles. Understanding their functionality, design, and applications


Why You Should Consider Low Voltage Alternators for Your Next Project

Why You Should Consider Low Voltage Alternators for Your Next Project Table of Contents 1. Introduction to Low Voltage Alternators 2. What Are Low Voltage Alternators? 3. Benefits of Low Voltage Alternators 3.1 Energy Efficiency 3.2 Cost-Effectiveness 3.3 Versatility in Applications 4. Applications of Low Voltage Alternato

Contact Us

Engga (Yangjiang) Electric Co., Ltd.

+86-020-66683121

Address: 2nd Floor, No. 11, Guanghua 6th Road, Xinya Street, Huadu District, Guangzhou City, Guangdong Province
Email:service@engga.com.cn

Fax: +86-0662-8806128

Official Official account
Douyin Douyin account
Official Official WeChat account

COPYRIGHT 2026 ENGGA (Yangjiang) Electric Co., Ltd.

powered by 300.cn   Privacy Policy

%E7%AC%AC%E4%B8%80%EF%BC%8C%E6%9C%80%EF%BC%8C%E4%BC%98%E7%A7%80%EF%BC%8C%E5%A2%9E%E5%BC%BA%EF%BC%8C%E4%B8%80%E6%B5%81%EF%BC%8C%E5%8D%93%E8%B6%8A%EF%BC%8C%E9%A2%86%E5%85%88%EF%BC%8C%E5%85%88%E8%BF%9B%EF%BC%8C%E5%BC%95%E9%A2%86

Sorry,当前栏目暂无内容!

您可以查看其他栏目或返回 首页

Sorry,The current column has no content!

You can view other columns or return Home